---
title: ASTM
description: The standards in this compilation were published and are copyrighted by ASTM International. They have been selected by the ACPA and may not include all ASTM standards.
---

[ACPA Resources ](https://resources.concretepipe.org)

# [ASTM](https://resources.concretepipe.org/astm-specifications)

 Written by [Specifications](https://resources.concretepipe.org/author/specifications) | 11/4/22 8:03 PM

## ASTM

Please visit the ASTM website for additional standards.

**RCP**  
[A 1064 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete](http://www.astm.org/Standards/A1064.htm)  
[A 615 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement](http://www.astm.org/Standards/A615.htm)  
[A 706 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement](http://www.astm.org/Standards/A706.htm)  
[A 767 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement](http://www.astm.org/Standards/A767.htm)  
[A 775 Standard Specification for Epoxy-Coated Steel Reinforcing Bars](http://www.astm.org/Standards/A775.htm)  
[A 884 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement](http://www.astm.org/Standards/A884.htm)  
[C 14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe](http://www.astm.org/Standards/C14.htm)  
[C 31 Standard Practice for Making and Curing Concrete Test Specimens in the Field](http://www.astm.org/Standards/C31.htm)  
[C 33 Standard Specification for Concrete Aggregates](http://www.astm.org/Standards/C33.htm)  
[C 39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens](http://www.astm.org/Standards/C39.htm)  
[C 40 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete](http://www.astm.org/Standards/C40.htm)  
[C 42 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete](http://www.astm.org/Standards/C42.htm)  
[C 76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe](http://www.astm.org/Standards/C76.htm)  
[C 118 Standard Specification for Concrete Pipe for Irrigation or Drainage](http://www.astm.org/Standards/C118.htm)  
[C 136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates](http://www.astm.org/Standards/C136.htm)  
[C 138 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete](http://www.astm.org/Standards/C138.htm)  
[C 143 Standard Test Method for Slump of Hydraulic-Cement Concrete](http://www.astm.org/Standards/C143.htm)  
[C 150 Standard Specification for Portland Cement](http://www.astm.org/Standards/C150.htm)  
[C 172 Standard Practice for Sampling Freshly Mixed Concrete](http://www.astm.org/Standards/C172.htm)  
[C 173 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method](http://www.astm.org/Standards/C173.htm)  
[C 231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method](http://www.astm.org/Standards/C231.htm)  
[C 361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe](http://www.astm.org/Standards/C361.htm)  
[C 403 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance](http://www.astm.org/Standards/C403.htm)  
[C 412 Standard Specification for Concrete Drain Tile](http://www.astm.org/Standards/C412.htm)  
[C 443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets](http://www.astm.org/Standards/C443.htm)  
[C 444 Standard Specification for Perforated Concrete Pipe](http://www.astm.org/Standards/C444.htm)  
[C 478 Standard Specification for Precast Reinforced Concrete Manhole Sections](http://www.astm.org/Standards/C478.htm)  
[C 494 Standard Specification for Chemical Admixtures for Concrete](http://www.astm.org/Standards/C494.htm)  
[C 497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile](http://www.astm.org/Standards/C497.htm)  
[C 505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints](http://www.astm.org/Standards/C505.htm)  
[C 506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe](http://www.astm.org/Standards/C506.htm)  
[C 507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe](http://www.astm.org/Standards/C507.htm)  
[C 595 Standard Specification for Blended Hydraulic Cements](http://www.astm.org/Standards/C595.htm)  
[C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete](http://www.astm.org/Standards/C618.htm)  
[C 654 Standard Specification for Porous Concrete Pipe](http://www.astm.org/Standards/C654.htm)  
[C 655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe](http://www.astm.org/Standards/C655.htm)  
[C 805 Standard Test Method for Rebound Number of Hardened Concrete](http://www.astm.org/Standards/C805.htm)[C 822 Standard Terminology Relating to Concrete Pipe and Related Products](http://www.astm.org/Standards/C822.htm)  
[C 877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections](http://www.astm.org/Standards/C877.htm)  
[C 913 Standard Specification for Precast Concrete Water and Wastewater Structures](http://www.astm.org/Standards/C913.htm)  
[C 923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals](http://www.astm.org/Standards/C923.htm)  
[C 924 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Withdrawn 2013)](http://www.astm.org/Standards/C924.htm)  
[C 969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines](http://www.astm.org/Standards/C969.htm)  
[C 985 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe](http://www.astm.org/Standards/C985.htm)  
[C 989 Standard Specification for Slag Cement for Use in Concrete and Mortars](http://www.astm.org/Standards/C989.htm)  
[C 990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants](http://www.astm.org/Standards/C990.htm)  
[C 1064 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete](http://www.astm.org/Standards/C1064.htm)  
[C 1103 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines](http://www.astm.org/Standards/C1103.htm)  
[C 1116 Standard Specification for Fiber-Reinforced Concrete](http://www.astm.org/Standards/C1116.htm)  
[C 1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems](http://www.astm.org/Standards/C1131.htm)  
[C 1214 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method](http://www.astm.org/Standards/C1214.htm)  
[C 1227 Standard Specification for Precast Concrete Septic Tanks](http://www.astm.org/Standards/C1227.htm)  
[C 1240 Standard Specification for Silica Fume Used in Cementitious Mixtures](http://www.astm.org/Standards/C1240.htm)  
[C 1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill](http://www.astm.org/Standards/C1244.htm)  
[C 1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design](http://www.astm.org/Standards/C1417.htm)  
[C 1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals](http://www.astm.org/Standards/C1478.htm)  
[C 1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations](http://www.astm.org/Standards/C1479.htm)  
[C 1602 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete](http://www.astm.org/Standards/C1602.htm)  
[C 1610 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique](http://www.astm.org/Standards/C1610.htm)  
[C 1611 Standard Test Method for Slump Flow of Self-Consolidating Concrete](https://www.concretepipe.org/specifications/astm/Standard%20Test%20Method%20for%20Slump%20Flow%20of%20Self-Consolidating%20Concrete)  
[C 1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure](http://www.astm.org/Standards/C1618.htm)  
[C 1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures](http://www.astm.org/Standards/C1619.htm)  
[C 1621 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring](http://www.astm.org/Standards/C1621.htm)  
[C 1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets](http://www.astm.org/Standards/C1628.htm)  
[C1840 Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe](https://www.astm.org/Standards/C1840.htm)  
[D 2240 Standard Test Method for Rubber Property—Durometer Hardness](http://www.astm.org/Standards/D2240.htm)

**Boxes**  
[A 1064 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete](http://www.astm.org/Standards/A1064.htm)  
[A 615 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement](http://www.astm.org/Standards/A615.htm)  
[A 706 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement](http://www.astm.org/Standards/A706.htm)  
[A 767 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement](http://www.astm.org/Standards/A767.htm)  
[A 775 Standard Specification for Epoxy-Coated Steel Reinforcing Bars](http://www.astm.org/Standards/A775.htm)  
[A 884 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement](http://www.astm.org/Standards/A884.htm)  
[C 31 Standard Practice for Making and Curing Concrete Test Specimens in the Field](http://www.astm.org/Standards/C31.htm)  
[C 33 Standard Specification for Concrete Aggregates](http://www.astm.org/Standards/C33.htm)  
[C 39 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens](http://www.astm.org/Standards/C39.htm)  
[C 40 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete](http://www.astm.org/Standards/C40.htm)  
[C 42 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete](http://www.astm.org/Standards/C42.htm)  
[C 136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates](http://www.astm.org/Standards/C136.htm)  
[C 138 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete](http://www.astm.org/Standards/C138.htm)  
[C 143 Standard Test Method for Slump of Hydraulic-Cement Concrete](http://www.astm.org/Standards/C143.htm)  
[C 150 Standard Specification for Portland Cement](http://www.astm.org/Standards/C150.htm)  
[C 172 Standard Practice for Sampling Freshly Mixed Concrete](http://www.astm.org/Standards/C172.htm)  
[C 173 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method](http://www.astm.org/Standards/C173.htm)  
[C 231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method](http://www.astm.org/Standards/C231.htm)  
[C 403 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance](http://www.astm.org/Standards/C403.htm)  
[C 494 Standard Specification for Chemical Admixtures for Concrete](http://www.astm.org/Standards/C494.htm)  
[C 595 Standard Specification for Blended Hydraulic Cements](http://www.astm.org/Standards/C595.htm)  
[C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete](http://www.astm.org/Standards/C618.htm)  
[C 805 Standard Test Method for Rebound Number of Hardened Concrete](http://www.astm.org/Standards/C805.htm)[C 822 Standard Terminology Relating to Concrete Pipe and Related Products](http://www.astm.org/Standards/C822.htm)  
[C 877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections](http://www.astm.org/Standards/C877.htm)  
[C 989 Standard Specification for Slag Cement for Use in Concrete and Mortars](http://www.astm.org/Standards/C989.htm)  
[C 990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants](http://www.astm.org/Standards/C990.htm)  
[C 1064 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete](http://www.astm.org/Standards/C1064.htm)  
[C 1116 Standard Specification for Fiber-Reinforced Concrete](http://www.astm.org/Standards/C1116.htm)  
[C 1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems](http://www.astm.org/Standards/C1131.htm)  
[C 1240 Standard Specification for Silica Fume Used in Cementitious Mixtures](http://www.astm.org/Standards/C1240.htm)  
[C 1443 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers](http://www.astm.org/Standards/C1433.htm)  
[C 1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals](http://www.astm.org/Standards/C1478.htm)  
[C 1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains](http://www.astm.org/Standards/C1504.htm)  
[C 1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD](http://www.astm.org/Standards/C1577.htm)  
[C 1602 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete](http://www.astm.org/Standards/C1602.htm)  
[C 1610 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique](http://www.astm.org/Standards/C1610.htm)  
C 1611 Standard Test Method for Slump Flow of Self-Consolidating Concrete  
[C 1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures](http://www.astm.org/Standards/C1619.htm)  
[C 1621 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring](http://www.astm.org/Standards/C1621.htm)  
[C 1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets](http://www.astm.org/Standards/C1677.htm)  
[D 2240 Standard Test Method for Rubber Property—Durometer Hardness](http://www.astm.org/Standards/D2240.htm)

**CMP**  
[A 849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe](http://www.astm.org/Standards/A849.htm)  
[B 788 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe](http://www.astm.org/Standards/B788.htm)  
[B 789 Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers](http://www.astm.org/Standards/B789.htm)  
[A 1042 Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains](http://www.astm.org/Standards/A1042.htm)  
[A 761 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches](http://www.astm.org/Standards/A761.htm)  
[A 762 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains](http://www.astm.org/Standards/A762.htm)  
[A 760 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains](http://www.astm.org/Standards/A760.htm)  
[A 807 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications](http://www.astm.org/Standards/A807.htm)  
[A 849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe](http://www.astm.org/Standards/A849.htm)  
[A 929 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe](http://www.astm.org/Standards/A929.htm)  
[A 978 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications](http://www.astm.org/Standards/A978.htm)  
[A 926 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe](http://www.astm.org/Standards/A926.htm)  
[A 930 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits](http://www.astm.org/Standards/A930.htm)  
[A 742 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe](http://www.astm.org/Standards/A742.htm)  
[A 796 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications](http://www.astm.org/Standards/A796.htm)  
[A 798 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications](http://www.astm.org/Standards/A798.htm)  
[A 862 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe](http://www.astm.org/DATABASE.CART/HISTORICAL/A862A862M-98.htm)  
[B 744 Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe](http://www.astm.org/Standards/B744.htm)  
[B 745 Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains](http://www.astm.org/Standards/B745.htm)  
[B 746 Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches](http://www.astm.org/Standards/B746.htm)  
[B 790 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits](http://www.astm.org/Standards/B790.htm)  
[D 1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber](http://www.astm.org/Standards/D1056.htm)

**Plastic**  
[D 1598 Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure](http://www.astm.org/Standards/D1598.htm)  
[D 1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings](http://www.astm.org/Standards/D1599.htm)  
[D 2122 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings](http://www.astm.org/Standards/D2122.htm)  
[D 2239 Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter](http://www.astm.org/Standards/D2239.htm)  
[D 2241 Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)](http://www.astm.org/Standards/D2241.htm)  
[D 2290 Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe](http://www.astm.org/Standards/D2290.htm)  
[D 2321 Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications](http://www.astm.org/Standards/D2321.htm)  
[D 2412 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading](http://www.astm.org/Standards/D2412.htm)  
[D 2444 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)](http://www.astm.org/Standards/D2444)  
[D 2665 Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings](http://www.astm.org/Standards/D2665.htm)  
[D 2680 Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping](http://www.astm.org/Standards/D2680.htm)  
[D 2729 Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings](http://www.astm.org/Standards/D2729.htm)  
[D 2749 Symbols for Dimensions of Plastic Pipe Fittings](http://www.astm.org/Standards/D2749.htm)  
[D 2837 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products](http://www.astm.org/Standards/D2837.htm)  
[D 3034 Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings](http://www.astm.org/Standards/D3034.htm)  
[D 3212 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals](http://www.astm.org/Standards/D3212.htm)  
[F 405 Specification for Corrugated Polyethylene (PE) Pipe and Fittings](http://www.astm.org/Standards/F405.htm)  
[F 412 Terminology Relating to Plastic Piping Systems](http://www.astm.org/Standards/F412.htm)  
[F 442 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)](http://www.astm.org/Standards/F442.htm)  
[F 449 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control](http://www.astm.org/Standards/F449.htm)  
[F 477 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe](http://www.astm.org/Standards/F477.htm)  
[F 481 Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields](http://www.astm.org/Standards/F481.htm)  
[F 512 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation](http://www.astm.org/Standards/F512.htm)  
[F 585 Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers](http://www.astm.org/Standards/F585.htm)  
[F 610 Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique](http://www.astm.org/Standards/F610.htm)  
[F 667 Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings](http://www.astm.org/Standards/F667.htm)  
[F 679 Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings](http://www.astm.org/Standards/F679.htm)  
[F 725 Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards](http://www.astm.org/Standards/F725.htm)  
[F 758 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage](http://www.astm.org/Standards/F758.htm)  
[F 794 Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter](http://www.astm.org/Standards/F794.htm)  
[F 891 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core](http://www.astm.org/Standards/F891.htm)  
[F 894 Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe](http://www.astm.org/Standards/F894.htm)  
[F 905 Practice for Qualification of Polyethylene Saddle-Fused Joints](http://www.astm.org/Standards/F905.htm)  
[F 913 Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe](http://www.astm.org/Standards/F913.htm)  
[F 948 Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow](http://www.astm.org/Standards/F948.htm)  
[F 949 Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings](http://www.astm.org/Standards/F949.htm)  
[F 1057 Specification for Frying and Braising Pans, Tilting Type](http://www.astm.org/Standards/F1047.htm)  
[F 1336 Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings](http://www.astm.org/Standards/F1336.htm)  
[F 1365 Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals](http://www.astm.org/Standards/F1365.htm)  
[F 1417 Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air](http://www.astm.org/Standards/F1417.htm)  
[F 1429 Test Methods for Specific Gravity of Water and Brine](http://www.astm.org/Standards/D1429.htm)  
[F 1473 Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins](http://www.astm.org/Standards/F1473.htm)  
[F 1488 Specification for Coextruded Composite Pipe](http://www.astm.org/Standards/F1488.htm)  
[F 1588 Test Method for Constant Tensile Load Joint Test (CTLJT)](http://www.astm.org/Standards/F1588.htm)  
[F 1674 Test Method for Joint Restraint Products for Use with PVC Pipe](http://www.astm.org/Standards/F1674.htm)  
[F 1675 Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis](http://www.astm.org/Standards/E1675.htm)  
[F 1732 Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material](http://www.astm.org/Standards/F1732.htm)  
[F 1759 Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications](http://www.astm.org/Standards/F1759.htm)  
[F 1760 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content](http://www.astm.org/Standards/F1760.htm)  
[F 1803 Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter](http://www.astm.org/Standards/F1803.htm)  
[F 1962 Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings](http://www.astm.org/Standards/F1962.htm)  
[F 2018 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens](http://www.astm.org/Standards/F2018.htm)  
[F 2136 Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe](http://www.astm.org/Standards/F2136.htm)  
[F 2263 Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water](http://www.astm.org/Standards/F2263.htm)  
[F 2306 Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications](http://www.astm.org/Standards/F2306.htm)  
[F 2307 Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)](http://www.astm.org/Standards/F2307.htm)  
[F 2389 Specification for Pressure-rated Polypropylene (PP) Piping Systems](http://www.astm.org/Standards/F2389.htm)  
[F 2418 Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers](http://www.astm.org/Standards/F2418.htm)  
[F 2433 Test Method for Determining Thermoplastic Pipe Wall Stiffness](http://www.astm.org/Standards/F2433.htm)  
[F 2435 Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe](http://www.astm.org/Standards/F2435.htm)  
[F 2487 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines](http://www.astm.org/Standards/F2487.htm)  
[F 2510 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes](http://www.astm.org/Standards/F2510.htm)  
[F 2536 Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs](http://www.astm.org/Standards/F2536.htm)  
[F 2562 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage](http://www.astm.org/Standards/F2562.htm)  
[F 2618 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems](http://www.astm.org/Standards/F2618.htm)  
[F 2648 Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications](http://www.astm.org/Standards/F2648.htm)  
[F 2649 Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks](http://www4.astm.org/Standards/F2649.htm)  
[F 2657 Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing](http://www.astm.org/Standards/F2657.htm)  
F 2658 Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings  
[F 2686 Specification for Glass Fiber Reinforced Thermoplastic Pipe](http://www.astm.org/Standards/F2686.htm)  
[F 2720 Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe](http://www.astm.org/Standards/F2720.htm)  
[F 2736 Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe](http://www.astm.org/Standards/F2736.htm)  
[F 2737 Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units](http://www.astm.org/Standards/F2737.htm)  
[F 2764 Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications](http://www.astm.org/Standards/F2764.htm)  
[F 2787 Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers](http://www.astm.org/Standards/F2787.htm)  
[D 3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials](http://www.astm.org/Standards/D3350.htm)

 

[View full post](https://resources.concretepipe.org/astm-specifications)

```json
{
  "@context" : "http://schema.org",
  "@type" : "BlogPosting",
  "author" : {
    "@type" : "Person",
    "name" : "Specifications"
  },
  "dateModified" : "2023-11-08T20:47:40.057Z",
  "datePublished" : "2022-11-04T20:03:52Z",
  "headline" : "ASTM",
  "image" : {
    "@type" : "ImageObject",
    "height" : 300,
    "url" : "https://9491265.fs1.hubspotusercontent-na1.net/hubfs/9491265/Images/ACPA/Website/Featured-Images/ACPA-Website-Featured-Image-Specifications-ASTM-1.png",
    "width" : 360
  },
  "mainEntityOfPage" : "https://resources.concretepipe.org/astm-specifications",
  "publisher" : {
    "@type" : "Organization",
    "logo" : {
      "@type" : "ImageObject",
      "height" : 60,
      "url" : "/hs/hsstatic/content_shared_assets/static-1.4092/img/default-amp-logo.png",
      "width" : 60
    },
    "name" : "ACPA Resources"
  }
}
```